The hottest new technology of contemporary glass c

The main market of glass containers can be roughly divided into three parts: containers for beverages, containers for food, and small containers for cosmetics and pharmaceuticals

in recent years, although the demand for glass packaging containers in the international market has shown a downward trend, glass packaging containers are still the main packaging materials for beverages, drugs and so on. In order to adapt to the fierce competition in the international packaging market, some foreign glass packaging container manufacturers and scientific research departments have constantly introduced new equipment, adopted and continuously provided customers with perfect pre-sales and after-sales services and new technologies through their own and authorized channels, so that the manufacturing of glass packaging containers has made a lot of progress

normal> Japan Toyo glass company and the art and Technology Research Institute jointly developed a mold that can halve the molding time of glass packaging containers. This kind of mold is made of stainless steel and copper alloy materials, so that the molding time of a glass packaging container is reduced from 32 seconds to 16 seconds, which not only increases the output, but also reduces the number of necessary molds. The manufacturing process of stainless steel and copper alloy materials used in the mold is to heat the stainless steel surface to 1000 ℃, adjust and control the flow rate and inflow speed of the steel alloy, so that the copper alloy and stainless steel maintain the best proportion, so as to form an alloy layer with thickness in microns. Using this kind of mold, although the price is 50% higher than the ordinary mold, the economic benefit is remarkable

normal> a factory under the United glass company in Britain uses a three drop bottle making machine and adopts the pressure blowing method to produce small caliber beer bottles, which not only ensures the product quality, but also increases the production capacity by 50%. The 250mm brown bidon brand lightweight beer bottles produced by the three drop bottle making machine are in short supply in the international market

normal> British gra - pnoida Development Co., Ltd. has successfully developed an automatic oil injection system for the preliminary mold of the bottle making machine, which is installed on 8 groups of 4-drop is bottle making machines for manufacturing pharmaceutical bottles and cosmetic bottles, with a machine speed of 410 per minute. The automatic fuel injection system can be controlled by various is bottle making machine software. If the software is not suitable, or the bottle making machine is driven by the drum, it can be controlled by a microprocessor with numeric keyboard, video display device and box memory

normal> the UK has also developed an advanced energy-saving glass feed channel - bh-f4 round specimen clamping diameter: Φ 13～ Φ 40mm； 00 series feeder. This kind of glass supply was also under Bayer's charge channel in 1967. It is an integral top brick structure made of special refractory materials. There is a cooling channel in the middle. When cooling is needed, cold air is sent along the feed center, thus overcoming the inefficiency of the conventional design of the feed channel heating system and cooling system. The temperature control of the material channel is sensitive and the operation is simple. At the same time, nearly 70% of the fuel can be saved by using the automatic temperature control system and the high-pressure mixture adjustment proportion system